Digimed valve

Valvola Digimed

Dolphin Fluidics' proportional Smart valves are 2-way, normally closed, full-separation valves for accurate dosing, mixing and dispensing of liquids and gases. The Digimed valve has two independent channels for proportional control of liquid, air or gas.

The Digimed valve has a very low power consumption, up to 20 times lower than conventional solenoid valves, and silent operation. It can also be directly interfaced to external pressure, flow or temperature sensors so that it can be closed-loop controlled to the target fluid dynamic function.  

The Digimed valve was specifically designed for the Health Care world, all materials conform to ISO10993. 

Each valve can be easily customised to meet the most stringent functional requirements of different applications, in terms of electronic and mechanical interface, fluidic performance and control electronics and communication on IoT platforms

1DSC04785 1920X700 (1)

Shape memory actuator for accurate control of valve opening and closing.


Totally silent operation.

DSC 1960 1920X700 B

32-bit microprocessor with built-in memory for closed-loop proportional air or gas control.


Customisation of control firmware to suit the application

3.IMG 20221021 WA0012 960X700

Hardware interface for external sensors to enable control loop closure on physical quantities in the circuit.

Stability and accuracy over time

Fascione 3

Full-seal gasket ensuring a perfect seal and a high level of valve hygiene

Digimed 1920X700new
Digimed 375X320 Neronew

Two separate channels with "barbed" end for soft tubes

Technical information

Air/Gas

Liquid

Pressure range (min ΔP - max ΔP)
0 - 4 bar
Flow
0,23 (m3/h)/√bar
Control
Proportional in closed loop
Operating voltage
5 - 24 VDC
Communication and user interface
Analog, PWM, RS 485, I2C, Status Led
Pressure range (min ΔP - max ΔP)
0 - 4 bar
Flow
0,23 (m3/h)/√bar
Control
Proportional in closed loop
Operating voltage
5 - 24 VDC
Communication and user interface
Analog, PWM, RS 485, I2C, Status Led

Contact request

For further information please fill out the form below